Projects of the Russian Science Foundation
2023 Competition for grants from the Russian Science Foundation in the priority area of activity of the Russian Science Foundation “Conducting fundamental scientific research and exploratory scientific research by small individual scientific groups”
Grant 24-21-00421. Development of numerical models and creation of a computer complex for studying and predicting the behavior of materials and structures under hyper-speed shock loads. Head Radchenko P.A.
Grant 24-22-00080. Development of scientific foundations for nanoengineering of the surface of TiNi and TiNiCuZr alloys with high corrosion properties achieved by high-dose ion implantation. Head Ostapenko M.G.
Grant 24-22-00281. Formation of structural-phase composition and its influence on the mechanical properties of cobalt (Co-Cr-W-C) heat-resistant alloy obtained in the process of wire electron beam additive manufacturing on a steel substrate. Head Guryanov D.A.
Grant 24-29-00097. Mechanisms of diffusion of substitutional impurities in α-Ti and α2-Ti3Al: a first-principles approach. Head Kulkova S.E.
Grant 24-29-00259. Structural-phase transformations and wear of tribo-coupling elements under intense frictional influence. Head Filippov A.V.
Grant 24-29-00420. Reversible transformations of the martensitic type as mechanisms of ultra-high technological plasticity and reduction of the cold-brittleness temperature of low-activation vanadium alloys. Head Tyumentsev A.N.
Grant 24-29-00431. Thermal stability of the microstructure and mechanical properties of promising reactor ferritic-martensitic steel during long-term exposure in the operating temperature range of the core of new generation nuclear reactors. Head Polekhina N.A.
Grant 24-29-00580. Plastic deformation and destruction of materials with structural and phase heterogeneity. Autowave approach. Head Orlova D.V.
Grant 24-29-00598. Development of conditions and modes of electron beam wire additive production of samples of TiNi-based alloys exhibiting the effect of superelasticity. Head Zhapova D.Yu.
Grant 24-29-00638. Development of the scientific basis for the production of powders based on nanoparticles of high-entropy oxides by the method of joint electric explosion of wires of various metals/alloys and the establishment of relationships between synthesis parameters and the structural-phase state of nanoparticles. Head Suliz K.V.
Grant 24-29-00827. Study of the laws of 3D printing, conditions for the formation of the structure and mechanical properties of heat-resistant steels of the pearlitic and austenitic classes used in the energy industry. Head Vlasov I.V.
2023 competition for extending the deadlines for projects supported by grants from the Russian Science Foundation under the event “Research by scientific groups under the guidance of young scientists” of the Presidential Program of Research Projects Implemented by Leading Scientists, Including Young Scientists
- Extension of project 20-79-10406 “Mechanisms of plastic deformation and fracture of multiphase gradient nanocrystalline materials”, leader A.V. Korchuganov.
2023 competition for grants from the Russian Science Foundation for the event “Conducting proactive research by young scientists” of the Presidential Program of Research Projects Implemented by Leading Scientists, including Young Scientists:
- 23-71-01086 "Multi-level approach to the analysis of the stress-strain state of sections of the earth's crust on the territory of the West Siberian Plate", leader Akhmetov A.
- 23-79-01096 “The influence of highly defective states on oxidation processes in low-activated vanadium alloys of the V-Me(Cr, W)-Zr system”, supervisor I.V. Smirnov
- 23-79-01107 "Numerical study of the conditions for suppression of primary foci of malignant tumors and regeneration of bone tissue in the spine during shock wave therapy", supervisor G.M. Eremina
- 23-79-01301 “Structural-phase state of metal alloys with surface and volumetric modification by mechanical-pulse shock treatment, including in the ultrasonic range,” supervisor A.V. Vorontsov.
- 23-79-01316 "Research on the mechanics of wear of welding tools during high thermomechanical loads during FSW of titanium alloys", head Amirov A.I.
2023 competition to extend the deadlines for projects supported by grants from the Russian Science Foundation in the priority area of the foundation’s activities “Conducting basic scientific research and exploratory scientific research by individual scientific groups”
Grant 20-19-00261 "Mechanisms of dispersion hardening and the formation of interstitial solid solutions in the high-entropy FeMnNiCrCo alloy when alloyed with nitrogen and carbon: interaction connection between microstructure, deformation mechanisms and physical and mechanical properties", leader Astafurova E.G.
Grant 20-19-00600 “Regularities of formation and evolution of deformation relief in plastically deformable polycrystals at different scale levels”, supervisor V.A. Romanova
2023 competition for RSF grants in the priority area of the foundation’s activities “Conducting fundamental scientific research and exploratory scientific research by individual scientific groups”
Grant 23-11-00222 "Multi-level analysis of deformation and fracture of Al-Si alloys obtained by electron beam additive melting", supervisor R.R. Balokhonov.
Grant 23-13-00359 "Development of new approaches to assessing the corrosion properties of biodegradable alloys after three-stage surface modification, using physiological low-frequency loading in a biological environment", leader Yu.P. Sharkeev.
2022 competition for RSF grants in the priority area of the foundation’s activities “Conducting fundamental scientific research and exploratory scientific research by small individual scientific groups”
Grant 23-29-00062 "The role of interfaces in the radiation resistance of nanocrystalline Fe-10Ni-20Cr alloy", head Zolnikov K.P.
Grant 23-29-00106 "In situ synthesis of metal matrix composites with a submicron carbide strengthening phase", leader G.A. Pribytkov.
Grant 23-29-00141 “Multifunctional composite coatings on a magnesium alloy based on natural diatomite and refractory oxide particles, modified by pulsed electron irradiation,” supervisor M.B. Sedelnikova.
Grant 23-29-00156 "Development of the scientific basis for increasing the stability of hydride-forming alloys under conditions of irradiation with a flow of charged particles and the presence of hydrogen by controlling the diffusion of substitution elements from gradient protective coatings", head G.P. Grabovetskaya.
Grant 23-29-00212 “Study of the conditions for osseointegration of a dental implant under shock wave therapeutic influence”, head Smolin A.Yu.
Grant 23-29-00402 "Study of the influence of the structure parameters of a chiral metamaterial on its ability to resist uniaxial deformation to ensure programmable properties", leader L.R. Akhmetshin.
Grant 23-29-00669 "Modernization of the structure and improvement of the functional properties of sintered aluminum matrix multiphase composites Al-Fe-Sn by forging with a change in the upsetting axis", head Rusin N.M.
Grant 23-29-00673 “Modification of the structure, phase composition and tribotechnical properties of a composite based on Ni3Al under the influence of pulsed electron irradiation,” supervisor K.V. Ivanov.
Grant 23-29-00929 "Physical basis for the in situ formation of composite materials with a metal matrix based on titanium alloys using the method of frictional mixing processing", supervisor A.V. Gusarova.
2022 competition for RSF grants for the event “Conducting proactive research by young scientists” of the Presidential Program of Research Projects Implemented by Leading Scientists, Including Young Scientists
Grant 22-73-00207. Additive molding of volumetric composites to create bioresorbable bone implants with antimicrobial properties. Head: Chebodaeva V.V.
Grant 22-79-00086. Study of the evolution of structural-phase states of composite ceramic microporous materials based on the MAX phase of Ti3AlC2, obtained by additive technologies. Head Krinitsyn M.G.
Competition for extending the deadlines for projects supported by grants from the Russian Science Foundation in the priority area of activity of the Russian Science Foundation “Conducting fundamental scientific research and exploratory scientific research by individual scientific groups”
Grant 19-19-00033-P. Development of ultra-fine-grain titanium alloys of pseudo β and transition class with high strength and fatigue properties. Head Naydenkin E.V.
2022 competition for RSF grants in the priority area of RSF activity “Conducting fundamental scientific research and exploratory scientific research by individual scientific groups”
Grant 22-19-00578. Development of scientific and technical foundations for creating 3D functional-gradient structures from dissimilar metals and alloys using high-performance electron beam additive technology. Head Kolubaev E.A.
Grant 22-19-00688. Development of principles for controlling the mechanical and thermophysical properties of high-temperature ceramic composite materials based on the creation of multi-level computer models and their experimental validation. Rukovo teacher Shilko E.V.
Grant 22-19-00441. Development of physical principles for designing the microstructure of multicomponent coatings of the Ti-Al-Ta-Si-N system based on an integrated approach combining theoretical models and their experimental validation. Head Dmitriev A.I.
Grant 22-11-00100. Research based on two-level models of the mechanisms of formation of residual stresses under conditions of laser alloying of Ti and Al powders with additions of elements that form the strengthening phase. Head Knyazeva A.G.
Grant 22-19-00802. Development of new low-activation austenitic steels for nuclear power, study of their microstructure and mechanical properties. Head Litovchenko I.Yu.
2022 competition for RSF grants in the priority area of RSF activity “Conducting fundamental scientific research and exploratory scientific research by small individual scientific groups” (regional competition)
Grant 22-21-20091. Development of mathematical models, algorithms, creation of a computer complex for predicting the behavior of promising materials and structures under dynamic loads. Head Radchenko P.A.
Grant 22-29-20172. Adhesive-cohesive mechanisms for the formation of a stir zone during friction stir welding of traditional and additive materials. Head Rubtsov V.E.
2022 competition for RSF grants in priority areas of RSF activity “Conducting fundamental scientific research and exploratory scientific research by individual scientific groups” (regional competition)
Grant 22-13-20031. Study of nonequilibrium mechanisms of phase and structure formation during the synthesis of metal-ceramic composite materials under conditions of reaction sintering with reduction stages. Head Korosteleva E.N.
2021 competition for RSF grants for the event “Conducting fundamental scientific research and exploratory scientific research by small individual scientific groups.”
Grant 22-21-00407 "Development of models, numerical algorithms and study of the behavior of promising composites under dynamic loads", head Radchenko A.V.
Grant 22-22-00805 "Development of physical principles for the production of entropy-stabilized multicomponent solid solutions (Zr, Ti, Hf, Ta/Nb, Mo/Cr)(B, C) and ceramic composites based on them with the possibility of high-temperature self-healing of defects", ; head Burlachenko A.G.
Grant 22-22-00891 “The influence of local metallurgical conditions on the directional crystallization of a heat-resistant nickel alloy in the process of wire electron beam additive molding”, head Fortuna S.V.
Grant 22-23-00078 "The influence of titanium silicides on the physicochemical and mechanical properties of the TiAl - oxide interface: a first-principle approach", supervisor S.E. Kulkova.
Grant 22-29-00047 "Regularities and mechanisms of deformation and fatigue failure under quasi-static and cyclic loading of TiNi substrates with surface amorphous/nanocomposite structures based on Ti-Ni-Ta, obtained by thin-film electron beam and/or pulsed ion beam methods", leader Meisner L.L.
Grant 22-29-00171 "Study of macroscopic instabilities of plastic flow from the standpoint of the autowave concept of deformation localization", director V.I. Danilov.
Grant 22-29-00438 “Strengthening, crack resistance and fracture of nickel-free austenitic steels in low climatic temperatures”, supervisor E.E. Deryugin.
Grant 22-29-01253 "Development of scientific foundations for the scalable synthesis of multicomponent metal nanoparticles by joint electric explosion of wires of various metals/alloys and the creation of heterophase high-entropy alloys based on them", head Pervikov A.V.
Grant 22-29-01601 "Mechanisms for in-situ control of the structural-phase state of alloys in the process of electron beam additive wire technology", supervisor A.V. Chumaevsky.
Grant 22-29-01608 "Substantiation of criteria for transition to destruction based on changes in the deformation and acoustic characteristics of metals", head Barannikova S.A.
Grant 22-29-01621 “Physico-mechanical basis for producing joints of the aluminum-titanium system by friction stir welding”, supervisor S.Yu. Tarasov.
2021 competition for RSF grants for the event “Conducting proactive research by young scientists” of the Presidential Program of Research Projects Implemented by Leading Scientists, Including Young Scientists
Grant 21-73-00243 "Development of the scientific basis for increasing the corrosion resistance of Ti-Al alloys by controlling the diffusion of oxygen in alloyed alloys x and oxides", head Bakulin A.V.
Grant 21-79-00084 "Development of physical and technical principles for controlling the structural-phase state of copper alloys under conditions of non-stationary local metallurgy during electron beam additive manufacturing", director A.V. Filippov.
Grant 21-79-00231 "Study of the patterns of low-temperature embrittlement of reactor low-activated ferritic-martensitic steel under conditions of increasing its strength properties", supervisor N.A. Polekhina.
Grant 21-79-00296 "Numerical study of the mechanical behavior of the lumbar spine during total intervertebral disc replacement with the aim of predicting service life", supervisor G.M. Eremina.
2021 competition for RSF grants for the event “Research by scientific groups under the guidance of young scientists” of the Presidential Program of Research Projects Implemented by Leading Scientists, Including Young Scientists
Grant 21-71-10079 "Mining of methane-saturated coal seams prone to rock bursts. Mathematical modeling.", head Eremin M.O.
Grant 21-73-10265 “Development of polymer-modified 3D porous calcium phosphate structures on the surface of titanium implants as a delivery system for biologically active substances, assessment of their effect on cellular activity using laser interference microscopy,” supervisor E.G.
Grant 21-79-10385 "Development of layered composites with combined reinforcement with increased impact strength and crack resistance", director A.V. Eremin.
2021 competition for the extension of projects of individual scientific groups in 2018
Grant 18-19-00273 "Development of hierarchical models of deformation and destruction of metal-ceramic composite coatings taking into account the evolution of residual stresses", leader R.R. Balokhonov.
2021 competition for RSF grants for the event “Conducting fundamental scientific research and exploratory scientific research by individual scientific groups”
Grant 21-19-00075 "Scientific substantiation and experimental techniques for applying a multi-level model of plastic deformation under active loading and creep of metals and alloys to the problem of predicting technological resource when processing metals by pressure", supervisor L.B. Zuev.
Grant 21-19-00741 "Development of the method of ultrasonic consolidation of layered fiber-reinforced composites based on promising thermoplastic matrices PEEK and PEI", director S.V. Panin.
Grant 21-19-00795 "The role of structural-phase transformations in the deformation and destruction of products made of titanium alloys produced by additive technologies", director A.V. Panin.
2020 competition for RSF grants for the event “Research by scientific groups under the guidance of young scientists” of the Presidential Program of Research Projects Implemented by Leading Scientists, Including Young Scientists
Grant 20-72-00184 "Numerical study of the physical laws of the process of fragmentation and subsequent growth of copper-aluminum bronze grains using electron beam additive technology", head Nikonov A. Yu., Novitskaya O. S., Bibko A. A., Lychagin D. V.
Grant 20-79-10406 "Mechanisms of plastic deformation and fracture of multiphase gradient nanocrystalline materials", director Korchuganov A.V., Kryzhevich D.S.
2020 competition for RSF grants for the event “Conducting proactive research by young scientists” of the Presidential program of research projects implemented by leading scientists, including young scientists
Grant 20-72-00138 "Development of scientific foundations of electronic transport properties and characteristics of turbostratic graphene with disorder in an external field", supervisor N.G. Bobenko.
2020 competition for RSF grants for the event “Conducting fundamental scientific research and exploratory scientific research by individual scientific groups”
Grant 20-19-00261 "Mechanisms of dispersion hardening and the formation of interstitial solid solutions in the high-entropy FeMnNiCrCo alloy when alloyed with nitrogen and carbon: the relationship of microstructure, deformation mechanisms and physical and mechanical properties", head Astafurova E.G.
Grant 20-19-00743 “Development of an integrated approach to qualitatively improve the functional properties of critical elements of highly loaded tribo-interface units through the formation of gradient surface layers in macroheterogeneous polymetallic alloys on a copper base using additive methods”, head Smolin A.Yu.
Grant 20-19-00600 "Patterns of formation and evolution of deformation about relief in plastically deformable polycrystals at different scale levels", supervisor V.A. Romanova.
2020 competition for the extension of projects of individual scientific groups in 2017
Grant 17-19-01425 "Study of the physical principles of the synthesis of composite powders based on titanium and its alloys for modification and molding of parts used in the aerospace industry by electron beam fusion", supervisor A.G. Knyazeva.
2019 competition for RSF grants for the event “Research by scientific groups under the guidance of young scientists” of the Presidential Program of Research Projects Implemented by Leading Scientists, Including Young Scientists
Grant 19-79-10148 "Development of hybrid composite materials with enhanced mechanical and functional properties based on thermosetting and thermoplastic matrices", director M.V. Burkov.
2019 competition for RSF grants for the event “Conducting proactive research by young scientists” of the Presidential program of research projects implemented by leading scientists, including young scientists
Grant 19-79-00136 “Physical basis for the formation of functional-gradient materials using a hybrid additive-thermomechanical method”, supervisor A.V. Chumaevsky
Grant 19-71-00083 “Stability of development workings and guard pillars when mining gently dipping coal seams with long faces. Mathematical modeling", leader Eremin M.O.
2019 competition for RSF grants for the event "Conducting fundamental scientific research and exploratory scientific research by individual scientific groups"
Grant 19-19-00033 "Development of ultra-fine-grain titanium alloys of pseudo β and transition class with high strength and fatigue properties", Head Naidenkin E.V.
2019 competition for extending the deadlines for projects supported by grants from the Russian Science Foundation in the priority area of activity “Conducting basic scientific research and exploratory scientific research by individual scientific groups”
Grant 16-19-10010 "Development of scientific foundations for increasing the reliability of metal structures during operation in low climatic temperatures by modifying the welded joint zone with composite materials, pulsed energy exposure and shock-mechanical processing", head Saraev Yu.N.
Grant 16-19-10025 "Selection and experimental and theoretical justification of macro-scale informative features for identifying micromechanisms of deformation and fracture acting during cold deformation of ductile alloys", head Zuev L.B.
2018 competition for RSF grants for the event “Conducting proactive research by young scientists” of the Presidential Program of Research Projects Implemented by Leading Scientists, including Young Scientists
Grant 18-71-00062 “Modeling of deformation processes of anisotropic single-crystalline barriers under shock loads”, head Tuch E.V.
Grant 18-71-00087 "Optical method for measuring deformation of materials: calculation of a continuous full field from dense optical flow data while ensuring maximum resolution", head Titkov V.V.
Grant 18-72-00057 "Physical kinetics of self-healing of macrodefects in heteromodular ceramic composites", supervisor E.S. Dedova
Grant 18-79-00149 "Regularities of recrystallization during annealing of high-carbon austenitic steels with a microstructure containing deformation twins", supervisor G.G. Mayer.
2018 competition for grants in the priority area of activity of the Russian Science Foundation “Conducting fundamental scientific research and exploratory scientific research by individual scientific groups”
Grant 18-19-00589 "Development of physical principles for the design of wear-resistant multilayer coatings based on transition metal nitrides using multi-level ones", supervisor A.I. Dmitriev
Grant 18-19-00559 "Development of the scientific basis for post-processing of 3D printed products made of titanium alloy VT6, ensuring their high mechanical and tribological properties", director A.V. Panin.
Grant 18-19-00273 "Development of hierarchical models of deformation and destruction of metal-ceramic composite coatings taking into account the evolution of residual stresses", leader R.R. Balokhonov.
Grant 18-19-00198 "Functional Ti-Ta/NbSi/Ni surface alloys with nanocomposite and amorphous structure on TiNi alloy substrates: thermodynamic modeling, thin-film electron beam synthesis, atomic structure and physical and mechanical properties" , leader Meisner L.L.
2017 competition for RSF grants for the event “Conducting proactive research by young scientists” of the Presidential Research Projects Program
Project 17-79-10108 "The role of stoichiometric composition and internal structure in the formation of properties and the onset of plastic deformation in high-entropy CoCrFeMnNi alloys", leader A.V. Korchuganov.
Project 17-79-10362 “Study of the mechanisms of deformation and fracture of titanium alloy Ti-6Al-4V with a nanostructured surface layer”, leader Sinyakova E.A.
2017 competition for RSF grants for the event “Research by scientific groups under the guidance of young scientists” of the Presidential Research Projects Program
Project 17-79-20382 “Design of new antimicrobial agents based on bicomponent metal nanoparticles and their oxides”, head A.S. Lozhkomoev
2017 competition for grants in the priority area of activity of the Russian Science Foundation "Conducting fundamental scientific research and exploratory scientific research by individual scientific groups"
Project 17-11-01232 "Nonlinear patterns of mechanical response of contrasting heterogeneous materials due to the dynamics of redistribution of "soft matter" , supervisor E.V. Shilko
Project 17-19-01197 "Scientific basis for controlling micromechanisms of plasticity and fracture of single-phase and heterophase high-nitrogen chromium-manganese austenitic steels", leader E.G. Astafurova
Project 17-19-01319 "Advanced nanostructured alloys formed by compacting bimetallic nanoparticles from immiscible metals: preparation, structure, physical and mechanical properties", leader M.I. Lerner.
Project 17-19-01374 “Nonequilibrium structural states at the nanoscale level and patterns of their evolution during plastic deformation of metallic materials”, leader A.N. Tyumentsev
Project 17-19-01425 "Study of the physical laws of the synthesis of composite powders based on titanium and its alloys for modification and molding of parts used in the aerospace industry by electron beam fusion", leader A.G. Knyazeva
2016 competition for grants in the priority area of activity of the Russian Science Foundation "Conducting fundamental scientific research and exploratory scientific research by individual scientific groups"
Project 16-19-10010 "Development of scientific foundations for increasing the reliability of metal structures during operation in low climatic temperatures by modifying the welded joint zone with composite materials, pulsed energy exposure and shock-mechanical processing", head Saraev Yu.N.
Project 16-19-10025 "Selection and experimental-theoretical justification of macro-scale informative features for identifying micromechanisms of deformation and fracture acting during cold deformation of ductile alloys", leader L.B. Zuev.
2015 competition for funding scientific research in priority thematic areas
Project 15-13-00023 "Study of the structural-phase states and properties of surface Ti-Ta alloys formed on the principles of additive technologies by pulsed electron beam melting of film-substrate systems in order to increase the mechanical compatibility, radiopacity and biointegration of medical alloys with shape memory on based on titanium nickelide", leader Meissner L.L.
Project 15-19-00191 “Development of the physical and technical foundations for producing model implants for medicine using laser sintering methods from low-modulus bioinert alloys of the titanium-niobium system”, leader Yu.P. Sharkeev.
Competition 2014 “Conducting fundamental scientific research and exploratory scientific research by teams of existing scientific laboratories (departments)”
Project 14-23-00096 "Study of the factors determining the antitumor activity of low-dimensional nanostructures based on aluminum hydroxide, and study of the mechanism of their action on tumor cells"
Competition 2014 “Conducting fundamental scientific research and exploratory scientific research by individual scientific groups”
Project 14-19-00766 "Development of a multi-level model of deformation and fracture of surface-hardened materials", leader A.V. Panin.
Project 14-19-00718 “Vortex mechanism of deformation and fracture in nanomaterials at various scale levels”, leader E.V. Shilko
Description of work performed and scientific results obtained
Grant 21-19-00075 "Scientific justification and experimental technique for applying a multi-level model of plastic deformation under active loading and creep of metals and alloys to the problem of predicting the technological resource during metal forming"
Project 19-19-00033 "Development of ultra-fine-grain titanium alloys of pseudo β and transition class with high strength and fatigue properties"
Project 18-19-00273 "Development of hierarchical models of deformation and destruction of metal-ceramic composite coatings taking into account the evolution of residual stresses"
Project 22-29-01608 ; "Justification of the criteria for transition to destruction based on changes in the deformation and acoustic characteristics of metals"